How to remove and install the rear spoiler on 2007 Toyota FJ Cruiser?

The removal process begins by disconnecting the negative battery cable terminal. You should remove the rear spoiler cover after dislodging its 4 screws. The procedure involves disconnecting the high mounted stop light connector and removing the 3 clamps using a clip remover and breaking the washer hose from the rear spoiler's claw before disconnecting the washer hose. Additionally, this step requires removing the 4 nuts to detach the spoiler. Installation requires four nuts used to mount the rear spoiler after hooking up the washer hose when rear wiper equipment is present and feeding the hose into the claw prior to clamping installation and connector connection. Close the process by screwing in 4 cover screws to the rear spoiler and applying a torque of 3.0 N.m (30 kgf.cm, 27 in.lbf). Finish the installation with a cable reconnect to the negative battery terminal at 3.9 N.m (40 kgf.cm, 35 in.lbf).

OEM 2007 Toyota FJ Cruiser Spoiler

Spoiler Wing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spoilers found

View related parts
2007 Toyota FJ Cruiser Cover, Rear
Part Number: 76893-35041
$28.31 MSRP: $39.40
You Save: $11.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Spoiler, N; Cover, Rear Spoiler
- Position: Rear
- Replaces: 76893-35040
- Part Name Code: 76893
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76893-35041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
- Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota FJ Cruiser Spoiler Assembly, Rear
Part Number: 76871-35101
$228.33 MSRP: $326.00
You Save: $97.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler, Rear; Spoiler
- Manufacturer Note: NO PAINT REQ.
- Position: Rear
- Replaces: 76871-35100
- Part Name Code: 76871
- Item Weight: 3.10 Pounds
- Item Dimensions: 49.0 x 8.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76871-35101
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
- Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
2007 Toyota FJ Cruiser Spoiler Assembly, Rear
Part Number: 76871-35091
$228.33 MSRP: $326.00
You Save: $97.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spoiler, Rear; Spoiler
- Position: Rear
- Replaces: 76871-35090
- Part Name Code: 76871
- Item Weight: 4.00 Pounds
- Item Dimensions: 49.9 x 6.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 76871-35091
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2007 Toyota FJ Cruiser Submodels:
- Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS

2007 Toyota FJ Cruiser Spoiler

Looking for affordable OEM 2007 Toyota FJ Cruiser Spoiler? Explore our comprehensive catalogue of genuine 2007 Toyota FJ Cruiser Spoiler. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2007 Toyota FJ Cruiser Spoiler Parts Q&A

Q: How to remove and install the rear spoiler on 2007 Toyota FJ Cruiser?
A: The removal process begins by disconnecting the negative battery cable terminal. You should remove the rear spoiler cover after dislodging its 4 screws. The procedure involves disconnecting the high mounted stop light connector and removing the 3 clamps using a clip remover and breaking the washer hose from the rear spoiler's claw before disconnecting the washer hose. Additionally, this step requires removing the 4 nuts to detach the spoiler. Installation requires four nuts used to mount the rear spoiler after hooking up the washer hose when rear wiper equipment is present and feeding the hose into the claw prior to clamping installation and connector connection. Close the process by screwing in 4 cover screws to the rear spoiler and applying a torque of 3.0 N.m (30 kgf.cm, 27 in.lbf). Finish the installation with a cable reconnect to the negative battery terminal at 3.9 N.m (40 kgf.cm, 35 in.lbf).