Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Spring Front; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
Manufacturer Note: THIRD SEAT-WITH(2PERSONS)
Position: Front
Replaces: 48131-42521
Item Weight: 7.00 Pounds
Item Dimensions: 15.8 x 7.0 x 5.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-42522
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Other Name: Spring, Coil, Front; Coil Spring, Front; Coil Spring Front; Coil Springs; Spring; Spring, Front Coil, Passenger Side; Spring, Front Coil, Driver Side
Position: Front
Replaces: 48131-42581
Item Weight: 7.30 Pounds
Item Dimensions: 15.9 x 7.1 x 5.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48131-42582
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
Base, Limited, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Spring, Coil, Rear; Coil Spring, Rear; Coil Springs; Spring, Coil, Rear Passenger Side; Spring, Coil, Rear Driver Side
Position: Rear
Replaces: 48231-42191, 48231-42190
Item Weight: 4.30 Pounds
Item Dimensions: 17.2 x 11.0 x 5.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 48231-0R030
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota RAV4 Submodels:
Base | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
2008 Toyota RAV4 Coil Springs
Looking for affordable OEM 2008 Toyota RAV4 Coil Springs? Explore our comprehensive catalogue of genuine 2008 Toyota RAV4 Coil Springs. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota RAV4 Coil Springs Parts Q&A
Q: How to disassemble the front shock absorber with coil springs on the LH side on 2008 Toyota RAV4?
A: On the LH side of the front shock absorber with coil spring one must start by taking off the front suspension support plate LH from the shock absorber. The front suspension support dust cover LH needs removal using a screwdriver with taped tip while handling the LH side of the front suspension support dust cover. The specified Service Tools are used to compress the coil spring while securing it in the vise using 2 nuts and 2 bolts at the shock absorber's lower bracket. The wind-up procedure requires vinyl tape application to protect the coil spring from damage. It is crucial to refrain from holding the shock absorber by the spring lower seat when it lacks the coil spring since impact wrenches can harm Special Service Tool: 09729-22031. Special Service Tool: 09729-22031 should be used to hold the spring upper seat before removing the nut. Begin by taking off the front suspension support sub-assembly LH from the shock absorber and then detach the front suspension support LH dust seal. To detach the components from the shock absorber start by removing the front coil spring seat upper LH together with the front coil spring insulator upper LH. The service technician should extract the front spring bumper LH from the spring seat before removing the front coil spring LH from the shock absorber alongside the Special Service Tool clearance of the coil spring. The last step of this process includes detaching the front coil spring insulator lower LH from the shock absorber.