Other Name: Bearing; Alternator Bearing; Bearings; Bearing(For Alternator Drive End Frame)
Replaces: 90099-10156
Fits the following Toyota Models:
4Runner | 1984-1986 | DLX, SR5 | 4 Cyl 2.4 L GAS
Camry | 1984 | DLX, LE | 4 Cyl 2.0 L GAS
Celica | 1984-1985 | GT, GTS, ST, Supra | 4 Cyl 2.4 L GAS, 6 Cyl 2.8 L GAS
Corolla | 1984-1985 | Base, DLX, LE, Sport DLX, Sport GTS, Sport SR5 | 4 Cyl 1.6 L GAS
Cressida | 1985 | Luxury | 6 Cyl 2.8 L GAS
MR2 | 1985 | GT | 4 Cyl 1.6 L GAS
Pickup | 1984-1986 | Base, Base Turbo, DLX, DLX Turbo, SR5, SR5 Turbo | 4 Cyl 2.4 L DIESEL, 4 Cyl 2.4 L GAS
Tercel | 1984-1986 | Base, DLX, SR5, STD | 4 Cyl 1.5 L GAS
Van | 1984 | Wagon Crg, Wagon DX, Wagon LE | 4 Cyl 2.0 L GAS
View More
| Page 1 of 2 |Next >
1-20 of 22 Results
Toyota Alternator Bearing
Choose genuine Alternator Bearing that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Alternator Bearing for your Toyota ? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.
Q: How to replace the Alternator Bearing on Toyota Sienna?
A:
The replacement of the generator drive end frame bearing starts with removing four screws and a retainer plate from the drive end frame. By using Special Service Tools: 09950-60010 and 09951-00250 and a hammer, technicians should tap out the drive end frame bearing that is embedded in the drive end frame. The installation of a new generator drive end frame bearing requires Special Service Tool: 09950-60010 and 09951-00470 operating with a press. To install the retainer plate position its tabs inside the drive end frame cutouts and then secure it with 4 screws torqued to 2.3 Nm (23 kgf-cm, 20 in-lbf).
Q: How to replace the Alternator Bearing on Toyota RAV4?
A:
The first step to change the generator drive end frame bearing requires removal of the four screws and the bearing retainer. The generator drive end frame bearing removal process requires usage of Special Service Tools: 09950-60010 (09951-00250), 09950-70010 (09951-07100) and a hammer for bearing extraction. Place a new bearing into position using both Special Service Tool and a press after using the same tool in the previous step. After installing the bearing retainer with its 4 screws focus on applying 2.3 N.m of torque (23 kgf.cm, 20 in.lbf).