How to remove the crankshaft seal on Toyota Sienna?

The procedure for 2GR-FE crankshaft main bearing seal removal begins with automatic transaxle assembly removal regardless of 2WD or 4WD models. The drive plate and ring gear sub-assembly requires Special Service Tool: 09213-70011 and 09213-70020 for crankshaft holding before the removal of eight bolts and front spacer and drive plate and rear spacer. The technique to extract the engine rear oil seal begins by chopping the lip using a knife followed by using a screwdriver to pull out the oil seal while averting crankshaft damage through tape cover on the screwdriver tip.

How to install the Crankshaft Seal on Toyota Sienna?

The first step to install the 2GR-FE engine rear oil seal requires application of MP grease to the lip of the new oil seal. Special Service Tools 09223-15030, 09950-70010, together with a hammer should be used to drive in the oil seal with a depth of -0.5 to 0.5 mm (-0.020 to 0.020 in.). After securing the crankshaft with Special Service Tool: 09213-70011 and 09213-70020. Lubricate the mounting bolt end with Toyota Genuine Adhesive 1324 along with Three Bond 1324 or equivalent products on 2 or 3 threads. Mount the front spacer followed by the drive plate and rear spacer onto the crankshaft before threaded installation of the 8 mounting bolts through several steps to achieve 83 Nm (850 kgf-cm, 61 ft-lbf) final torque. You should finish the installation process by fitting the automatic transaxle assembly based on 2WD or 4WD system needs.

OEM Toyota Sienna Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crankshaft Seals found

View related parts
Toyota Sienna Rear Main Seal
Part Number: 90311-A0027
$44.08 MSRP: $61.37
You Save: $17.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Oil Seal; Rear Seal; Front Seal; Seal, Engine Rear Oil; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 90080-31053, 90311-92003, 90311-92010, 90311-92004, 90311-92006, 90311-92009
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2020 Toyota Sienna | Base, CE, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Limited, XLE Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Rear Main Seal
Part Number: 90311-A0020
$28.19 MSRP: $39.24
You Save: $11.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Rear Seal; Seal, Engine Rear Oil; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 90311-A0016, 90311-89006
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2012 Toyota Sienna | Base, LE | 4 Cyl 2.7 L GAS
View related parts
Toyota Sienna Crankshaft Seal, Front
Part Number: 90311-A0015
$7.88 MSRP: $10.96
You Save: $3.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Oil Seal for Timing Gear or Chain Case; Engine Crankshaft Seal
- Position: Front
- Replaces: 90311-A0019, 90311-42043
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2012 Toyota Sienna | Base, LE | 4 Cyl 2.7 L GAS
View related parts
Toyota Sienna Oil Seal, Front
Part Number: 90311-A0005
$19.11 MSRP: $26.60
You Save: $7.49 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Multi-Purpose Seal; Timing Cover Seal; Crankshaft Seal; Front Seal; Timing Cover Oil Seal; Engine Crankshaft Seal
- Position: Front
- Replaces: 90311-42019, 90311-42007, 90311-42037, 90311-42036
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2016 Toyota Sienna | Base, CE, L, LE, Limited, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Rear Main Seal
Part Number: 90311-A0035
$40.26 MSRP: $56.03
You Save: $15.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Rear; Rear Seal; Seal, Engine Rear Oil; Crankshaft Seal
- Position: Rear
- Replaces: 90311-90010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Crankshaft Seal, Front
Part Number: 90311-A0033
$13.61 MSRP: $18.95
You Save: $5.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Seal, Oil(For Timing Gear Case Or Timing Chain Case)
- Position: Front
- Replaces: 90311-40044
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Sienna | 25th Anniversary Edition, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sienna Seal, Oil(For Timing Gear Case Or Timing Chain Case), Front
Part Number: 90311-A0028
$9.07 MSRP: $12.63
You Save: $3.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Type T Oil; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2020 Toyota Sienna | L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 6 Cyl 3.5 L GAS

Toyota Sienna Crankshaft Seal

Choose genuine Crankshaft Seal that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Crankshaft Seal for your Toyota Sienna? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sienna Crankshaft Seal Parts and Q&A

Rear Main Seal
90311-A0027
Q: How to remove the crankshaft seal on Toyota Sienna?
A:
The procedure for 2GR-FE crankshaft main bearing seal removal begins with automatic transaxle assembly removal regardless of 2WD or 4WD models. The drive plate and ring gear sub-assembly requires Special Service Tool: 09213-70011 and 09213-70020 for crankshaft holding before the removal of eight bolts and front spacer and drive plate and rear spacer. The technique to extract the engine rear oil seal begins by chopping the lip using a knife followed by using a screwdriver to pull out the oil seal while averting crankshaft damage through tape cover on the screwdriver tip.
Oil Seal, Front
90311-A0005
Q: How to install the Crankshaft Seal on Toyota Sienna?
A:
The first step to install the 2GR-FE engine rear oil seal requires application of MP grease to the lip of the new oil seal. Special Service Tools 09223-15030, 09950-70010, together with a hammer should be used to drive in the oil seal with a depth of -0.5 to 0.5 mm (-0.020 to 0.020 in.). After securing the crankshaft with Special Service Tool: 09213-70011 and 09213-70020. Lubricate the mounting bolt end with Toyota Genuine Adhesive 1324 along with Three Bond 1324 or equivalent products on 2 or 3 threads. Mount the front spacer followed by the drive plate and rear spacer onto the crankshaft before threaded installation of the 8 mounting bolts through several steps to achieve 83 Nm (850 kgf-cm, 61 ft-lbf) final torque. You should finish the installation process by fitting the automatic transaxle assembly based on 2WD or 4WD system needs.