The installation requires users to position the headlight dimmer switch assembly through its 2 clamps while following the illustrated steps before fastening it with the clamp and connecting the connector. Mount the windshield
Wiper Switch assembly after it followed the spiral cable sub-assembly installation. Install the steering column upper cover immediately after which you should add the steering column lower cover. A proper alignment of the spiral cable needs to occur before you can install the
Steering Wheel assembly. The horn button assembly must be checked at its center point before installation. Affix the cable to the negative battery terminal while applying torque at 3.9 Nm (40 kgf-cm, 35 in-lbf). Proceed with the inspection of SRS warning light after installing both No. 3 and No. 2 steering wheel lower covers.